Did you know it is important to oil your blade after each use? Oiling your blade after every use will keep it sharp and in top condition. This will give you a smooth cut every single time and prolong the life of your blades. How do you oil a reciprocating saw?
To oil your reciprocating saw, remove the blade. Then clean off any old oil and dirt from the saw with a clean cloth. Apply a few drops to the moving parts of your saw. Attach the blade back to the saw.
This will keep your blades in tip-top shape and sharp. If you do it regularly, then this will extend the life of your blades significantly and these replacement costs can add up over time.
What Oil Should You Use For Reciprocating Saw
While WD-40 oil was popular in the past for sawing, many users online believe this is a poor choice. The reason why is that it doesnt last long and coats the blade with a thin layer of oil which can cause rust. Instead, you should use an SAE 5w-20 Oil instead.
Make sure you select lightweight materials that are suitable for use in auto engines. This isnt only because the saws are powered by gas but because its thin enough to penetrate through even tight spaces where other thicker oils cannot go through.
Oil Reciprocating Saw
This is a comprehensive guide on how to oil a reciprocating saw. Learn how to oil a reciprocating saw. Continue reading to find out the steps involved.
Step 1
Your blade should not be running at high speeds. This is crucial because the oil can get flung at your skin and cause severe burns if it comes into contact with your eyes or hands.
Step 2
Use an air compressor or canned compressed to clean the teeth of your blades. This will ensure that the blade is well lubricated, which will allow us to move on to the next step.
Step 3
Now that all parts of your reciprocating saw are free from dirt and debris, you can now apply oil to its different parts. Spray aerosol oil is a fast and easy way to apply oil.
Step 4
You should cover all pivot points, as well as the inside and outside of the blades base. Rubber grips are a good idea as they can attract dirt and dust easily. Remember to allow the oil to penetrate the metal for a sufficient time.
Step 5
Use a paper towel or a rag to clean oil off your blade. Next, open the storage container to get rid of it.
Step 6
You can use a power washer or hose to clean the oil completely.
You are now done oiling your reciprocating saw. To confirm that you have used the right amount of oil or not, test it out by running it through a piece of scrap wood first before doing your projects around the house.
How Many Times You Should Oil Reciprocating Saw
According to most users online, you should oil your reciprocating saw at least once a month for optimum performance. However, the frequency of oiling your saw will depend on several variables such as working conditions, usage, storage, and how often you use it. That is why some users online recommend changing the oil every time after using it.
Tips For Oiling A Reciprocating Saw
- Make sure that the blade is not running at extreme speeds before oiling it. This is to prevent the oil from getting flung off and burning your skin if it comes in contact with your hand or eyes.
- Clean any debris from the blades teeth using an air compressor or canned compressed air before applying oil. This will ensure that all parts of the blade are well lubricated.
- Spray aerosol oil can be used to apply oil quickly and directly to the different parts.
- Cover all pivot points as well as the inside of the blades base and rubber grips since these tend to attract dust and debris easily. Remember that you must always
Conclusion
Now you know how to oil a reciprocating see and what the correct technique is. Oil lubricates your reciprocating saw so as to keep it functioning smoothly and prevent rusting as well as extending its life.
FAQs
Q. What Oil Type Should I Use?
A: I recommend using SAE 10 or 20 oil which is lightweight and meant for auto engines since this will not only last longer but can also penetrate into tighter spaces in the blade (where WD-40 cannot).
Q: Can I Use WD-40 On My Saws?
A: Never use WD-40 on your blades. This can cause rust and burn your skin if it gets in contact with it. Instead, always choose an SAE 10 or 20 oil instead, which are thinner oils good for auto engines.
Q. How Often Should My Reciprocating Saw Be Oiled?
A. The majority of users recommend this at least three times per calendar year. Some even suggest it as often as once every month. This will ensure your blades are in top condition for years of use. It is recommended to oil your reciprocating saw between 5-10 times per year.
Q. Do You Need Oil For A Reciprocating Saw.
A. Yes. Oil your saw at least once per month, or more depending on how frequently you use it. This will prevent it from rusting and keep it running smoothly for many years.
Q. How Can I Prolong The Life Of My Sawzall Blade?
A: You can do a lot to prolong the life of your Sawzall blade. It is important to oil your Sawzall blade every month. You should also clean any areas that collect dust or debris, such as the pivoting points or rubber grips, with canned air. Also, remember to keep your blade covered every time after using it since this will prevent dust from gathering on your blade.
Q. How Do I Lubricate My Milwaukee Sawzall?
A: Before oiling a Milwaukee Sawzall Sawzall saw, make sure it isn’t running at high speeds. Second, clean any debris from its teeth using canned air or an air compressor. Spray aerosol oil on the pivot points of the blades, as well as on both sides and under your rubber grips to remove any dust tracks. You must cover your blade with oil after you have lubricated it to prevent dust from building up.
